CASIO GWN-Q1000-7ADR

DETAILED DESCRIPTION

Case material: carbon

Carbon gives not only sporting and dynamic touch, but also creates long lasting and extremely durable strap with significantly increased lifespan.
Case material: plastic

Mostly of rubber, resins or silicone. This type of material has high flexibility, is hypoallergenic, water resistant, and does not absorb sweat.
Movement: solar power (Tough solar)

Tough Solar is a power technology of Casio watches. The solar cells, which are under the crystal, convert light energy into electrical energy, which is stored in the battery and powers the watch. This eliminates the need for battery replacement!
Strap material: plastic

Mostly of rubber, resins or silicone.

This type of material has high flexibility, is hypoallergenic, water resistant, and does not absorb sweat.
12/24-hour timekeeping

A choice of two ways to display time in 12 or 24 hour format. For example, 3:45 or 15:45.
5 daily alarms

5 independent alarms for flexible reminders of important events. You can set 5 different reminders.
Auto LED

Illumination of the main dial is provided by LED diode. The auto function provides automatic switching of illumination by leaning your hand to the face. The illumination is activated by a sensor, which is activated by turning your hand by 45 ° this illuminates the main dial. This feature can be easily turned on or off. When auto function is deactivated, activate illumination by touch of a button.
Automatic hand adjustment

The watch automatically checks starting position of hands every hour, and adjust correct position if necessary. This eliminates deviation of the hands because of mechanical impact or influence of the magnetic field.
Barometer (260/1100 hPa)

A special sensor measures the air pressure, measured values ​​are shown on the display of the watch. The measuring range is 260/1100 hPa. The display unit is 1hPa. The display shows the graph of atmospheric pressure. The chart changes are recorded automatically at regular intervals. According to the changes in the graph one can easily determine changes in weather.
Timer – 1/1 minutes – 1 hour

Countdown timer with a maximum time of 1 hour. Example: set a countdown for 30 minutes. After 30 minutes alarm starts.
Tide indicator

The display of the watch shows current state of the tide in a simple graph. This view is based on the current moon phase. By entering latitude and longitude of your position you can easily display current tide level.
Depth gauge

The pressure sensor detects changes in water pressure and converts them to the current depth of the dive. The maximum measured depth is 50 meters.
Battery level indicator

This feature is mostly found in solar-powered watches. It shows the battery charge status. If the indicator indicates a low level, just expose the watch to light and battery will recharge.
Compass – digital

Built-in compass displays the North and other cardinal points. The display additionally shows angle towards the goal from 0 to 359 degrees. Resolution/accuracy of compass is 1 degree. The compass is one of highly recommended features for all adventurers, and hiking and outdoor lovers.
Neo-display

An illumination layer on hands which, after a short recharge, ensures illumination in the dark.
Corrosion resistance

The watch case is made of Titanium in order to ensure corrosion resistance.
Shock resistance

A unique design that eliminates the adverse effects of mechanical impact, vibration and shock, thus ensuring a high mechanical resistance of watches.
Pre-programmed calendar

The display shows the current date. It is pre-programmed, so there is no need to set short and long month and leap years. Most watches have this pre-programmed date until 2099th.
Radio signal reception (EU, USA, Japan, China)The watch Receives signals from atomic clocks, usually once every 24 hours. Deviation of atomic clocks is only one second in three million years. Therefore, watches equipped with this technology to receive radio signals are extremely accurate. Their owners can be assured that their time and date is always exact. This watch is receiving a signal from the transmitter, which are located in Europe (United Kingdom – Anthon, Germany), USA (Fort Collins, Colorado), Japan (Fukushima and Kyushu) and China (Shangri). In the event that you find yourself in an area that is not covered by the signal, your watch still maintains very high accuracy, and after returning to the coverage your time is again automatically adopted.
1/100 second stopwatch – 24 hours Elapsed time, split time and final time are measured  to the nearest hundredth of a second. The maximum measured time is 24 hours.
World time

Display simply shows the times in selected major cities and areas of the world.
Smart Access technology

Revolutionary technology that allows intuitive operation of the watch via the crown. The crown is electronic and reacts to pressure and movement. The crown is not used anymore only for time setting like it is common in analog watches. Thanks to Smart Access technology you do not have to use several buttons, by using a crown it is possible now very easily and intuitively control all functions of the watch.
Thermometer: -10 ° C / + 60 ° C The sensor may measure the temperature at -10 ° C / + 60 ° C. The temperature is measured in both, degrees of Celsius (° C) and Fahrenheit (° F). Resolution is 0.1 ° C or 0.2 ° F.
Sunrise/sunset display

Based on your latitude and longitude inputs, the sunset and sunrise times are displayed.
Altimeter

Barometric sensor records the atmospheric pressure from which an altitude is calculated. The altimeter can measure elevation of up to 10.000 meters above sea level.
Water resistance: 200M/20ATM

Watches marked with water tightness 200M/20ATM are designed for swimming, snorkeling, and for diving with breathing apparatus. 200M/20ATM indicates the degree of water resistance standardized by ISO 6425. ISO tests include temperature changes, depth, pressure (water and air) for different times under rest and during manipulation with  the operative part of the watch. The dive models, subsequently performs the test of resistance to salt water and  the ability to cope with the watch positive pressure (decompression simulation).
Crystal: sapphire

Sapphire glass in the watch was made in a laboratory by melting aluminum oxide (Al2O3) in the presence of hydrogen and oxygen at 2000 °C. After crystallization into the corundum ‘pear’, it’s cut and further processed into the desired shape and size. Sapphire glass is the hardest glass used in watches. It would be second behind diamond on the scale of mineral hardness, so it can only scratched by diamond. Its only disadvantage is its fragility.
Closure type: Standard closing

The most widely used method of fastening, which is mainly used in leather and silicone straps. Simply turn on the buckle into the required holes as needed.